Continuing from the previous post — more patterns for the 2″ square loom.
Diamond Outline
R1: P
R2: P6, U3, P6
R3: P4, U3, O1, U3, P4
R4: P2, U3, P5, U3, P2
R5: Rpt R3
R6: Rpt R2
R7-8: P
Unfortunately the diamond can’t be centered in the square. Its off-centeredness is very noticeable on these tiny squares.
Solid Diamond
R1: P
R2: P6, U3, P6
R3: P4, U3, O1, U3, P4
R4: P2, (U3, O1) x 2, U3, P2
R5: Rpt R3
R6: Rpt R2
R7-8: P
Horizontal Xs (for 2″ loom)
R1: P
Even Rows: (U3, P3) x 2, U3
Odd Rows: (P3, O3) x 2, P3
R8: P
X-Stitch Technique (and pattern)
You can find instructions for working the X-Stitch here. (The sample square woven using green yarn in that demo uses the pattern below with R2 and R3 in reverse order and also R6 and R7.)
R1: P
R2: P2, U3, P5, U3, P2
R3: (U3, O1) x 3, U3
R4: P
R5: P9, X-Stitch, P6
R6: Rpt R3
R7: Rpt R2
R8: P
*******************************
The following two patterns use Layer 2 Manipulation, or L2M, which is described in the Glossary and demonstrated in the Maple Leaf post about 3/4 of the way down the page. (Later on I’ll reweave them and give more instructions if necessary.)
Cross Center
Special Instructions
L2M: Warp loom taking L2 warp #8 UNDER L1 #3 and #6.
R1: P
R2: P4, U3, O1, U3, P4
R3: P2, (U3, O1) x 2, U3, P2
R4: (P3, O3) x 2, P3
R5: Rpt R4
R6: Rpt R3
R7: Rpt R2
R8: P
Cross Center Variation
Special Instructions
L2M: Warp loom taking L2 warp #8 UNDER L1 #3 and #6.
R1: P
R2: P4, U3, O1, U3, P4
R3: P6, U3, P6
R4: (P3, O3) x 2, P3
R5: Rpt R4
R6: Rpt R3
R7: Rpt R2
R8: P